CETIE is an international association aimed at preparing technical documentation related to packaging (glass and PET containers) dedicated to the bottling of the beverage, cosmetic and pharmaceutical sectors.
CETIE is therefore committed to promoting best practices in this area, based on expert comparison, in order to arrive at the publication of consensual reference documents.
The association addressed, from the outset, the issues raised by the SUP Directive involving all the actors in the PET sector. During June 2019, after careful preparatory work, the European Commission published Directive 2019/904.
Among the innovations introduced, one of the most important was a substantial revolution with regard to caps.
PACKAGING AND PRODUCTION:
obligations to comply with the SUP Directive.
Source: Berry Global
By 2024, PET bottles (up to 3 liters) will have to provide caps that remain attached to the neck of bottles (Tethered caps). In this way, the dispersion of plastic material in the environment is to be limited to a maximum.
This is not a marginal change, given that 2024 is very close if we consider the large activity of transformation of machines and production lines of bottling plants to cope with the new PET bottles to launch on the market within 3 years.
The European Commission has entrusted CEN - the European Committee for Standardization - with the task of creating a harmonized standard to “numerically” express the provisions of the Directive.
The resulting standard will, in fact, have the force of law, and compliant products will automatically be considered in line with the European Directive.
CEN then promoted the WG 25 working group [inside the Technical Comitee TC261 related to Packaging] under the chairmanship of Nicholas Harris of CETIE, which was responsible for drawing up the production standard, on the basis of proposals developed by CETIE itself.
A dedicated WG on SUP was set up and regular meetings with interested European actors took place, including suppliers for resins and molds, international beverage brands as well as producers of PET preforms, caps and bottling/packaging lines. In total more than fifty producers.
READ ALSO: "The leading players who use PET containers anticipated SUP Directive"
The latter have proposed various solutions of cap linked to the bottle up to the definition of a standard perfectly compliant with the needs of the legislation.
"GME 30.37" is a first proposal, a finish1 with a diameter of 26/22, 13 height with 1 single thread, modified in 2019, and now able to withstand high pressure levels (8.4 g / l against 7 g / l of the previous solution).
As soon as this new version was published, work began within the "PET Plenary" working group to develop an equivalent finish suitable for tethered cap. This new solution, called the GME 30.40, is the first international standard specifically intended for caps linked to the bottles.
This new finish has an external thread diameter of 26.44mm and an internal diameter of 21.74 mm, a single thread of almost 2 complete turns and a pitch of 2.3 mm, with a height around 15mm to integrate the several tethering mechanisms developed by different cap suppliers.
The new standard is now published by CETIE under the “experimental” status, which means that it has been Lab approved, but industrial practice is still lacking and feedback from industrial practice may lead to technical modifications.
The proactive approach of industrial stakeholders to the standardization of processes is certainly an aspect to be praised as well as fully meeting the requirements indicated by the European Commission.